Eagle Access Control Systems, Inc. - Commercial Operators

Eagle Access Control Systems, Inc.

Commercial Gate Operators

EAGLE-2000

The Eagle-2000 Series is the premiere line of Heavy Duty Commercial Sliding Gate Operators. The Eagle-2000 combines smooth and quiet operation with the power and durability necessary for all Commercial application. These Operators are manufactured in the USA with dedication to safety, precision perfornamnce, and dependability. For starters there is the Eagle-2000 1/2 HP Operator which comes in both Fail Safe and Fail Secure Models. These models can handle gates up to 45' and 1000 lbs at an opening speed of 12" per second. Also in the 2000 Series are the Eagle-2000-1HP and the Eagle-2000-DM Models. The Eagle-2000-1HP uses two 1/2 HP motors working in parallel and is intended for the most heavy duty gates, capable of handling gates up to 45' and 2000lbs. The Eagle-2000-DM is a Dual Motor Operator which uses one 1/2 HP motor to open the gate, and another to close it. The DM model is intended for high traffic ares with gates up to 45' and 1000lbs. The Eagle-2000 Series Operators are warrantied for 5 years Commercial use, or 7 years Residential use. Dimensions : 17" (W) x 17.5" (D) x 25.5" (H). Download The Eagle-2000 Manual

EAGLE-2000-APT

The Eagle-2000-APT Series Apartment buildings, gated communities, industrial sites-anywhere there are big gates and a lot of traffic, Eagle-APT is the best operator for the job. The Eagle-APT series of operators is designed and built for the busiest sites, delivering the rugged durable power you need for these demanding applications. Install Eagle-2000-APT for reliable power. Installation is made simple with the advanced features you most often need standard on every operator. Features like Stop-Reverse, allowing your transmitter to work like a 3-button station or Motor Brake for added control on downhill applications. Master/Slave operation has never been easier. Just two wires provide full communication and Global Inputs between the master and slave operators. Connect any accessories to either the master or slave and the Diamond Control Board does the rest. Dimensions : 26" (W) x 18" (D) x 17" (H).

Eagle-200

The Eagle-200 Series is a specially designed line of Heavy Duty Commercial Swing Gate Operators. The models in this series are stong and dependable, ideally suited for Commercial and Industrial aplications. Like all Eagle Operators, this line is manufactured in the USA with special attention to safety, performance, and dependability. The Eagle-200 is a 1/2 HP Model and capable of handling gates up to 20' and 1000lbs with an opening speed of 18-20 seconds. The Eagle-200-1HP Model is intended for heavy duty gates and uses two 1/2 HP motors running in parallel. The Eagle-200-DM Model Gate Operator uses one 1/2 HP motor to open the gate and another to close it, ideal for high traffic Commercial areas. The Eagle-200 Series Operators comes with a 5 year warranty for Commercial applications, which is extended for 7 years if used Residentially. Dimensions : 16" (W) x 22" (D) x 28" (H). Download Eagle-200 Manual



All Eagle Operators are UL325 and UL991 Compliant! Every Eagle Operator ships with the new Diamond Control Board. This board has many unique and advanced features, and they all come standard! The Eagle-Power Series is a fully functional Battery Back-Up System for a reasonable price! Standard Commercial Operator Features include: 2 Wire Master Slave connection system, you can even use non-shielded wire. Two 120 VAC Power Outlets for the users convenience. Heavy Duty Gearbox for efficiency and quiet running. One Pass Tailgating feature for safety and security. Stop-Reverse to enable your one button Transmitter to work as a 3 Push Button Station. Adjustable Timeer with maximum close time of 60 seconds. Outputs including 24VDC for MAG Lock, Alarm, and 24VAC auxiliary power. Accessories can be connected to either the Master or Slave Operator. Independently adjustable Open and Close Delay for Master Slave Systems. Power On/Off Switch for easily accessible power disconnect to allow easy installation and service.		Eagle Access Control Systems, Inc. Commercial Gate Operators EAGLE-2000 The Eagle-2000 Series is the premiere line of Heavy Duty Commercial Sliding Gate Operators. The Eagle-2000 combines smooth and quiet operation with the power and durability necessary for all Commercial application. These Operators are manufactured in the USA with dedication to safety, precision perfornamnce, and dependability. For starters there is the Eagle-2000 1/2 HP Operator which comes in both Fail Safe and Fail Secure Models. These models can handle gates up to 45' and 1000 lbs at an opening speed of 12" per second. Also in the 2000 Series are the Eagle-2000-1HP and the Eagle-2000-DM Models. The Eagle-2000-1HP uses two 1/2 HP motors working in parallel and is intended for the most heavy duty gates, capable of handling gates up to 45' and 2000lbs. The Eagle-2000-DM is a Dual Motor Operator which uses one 1/2 HP motor to open the gate, and another to close it. The DM model is intended for high traffic ares with gates up to 45' and 1000lbs. The Eagle-2000 Series Operators are warrantied for 5 years Commercial use, or 7 years Residential use. Dimensions : 17" (W) x 17.5" (D) x 25.5" (H). Download The Eagle-2000 Manual EAGLE-2000-APT The Eagle-2000-APT Series Apartment buildings, gated communities, industrial sites-anywhere there are big gates and a lot of traffic, Eagle-APT is the best operator for the job. The Eagle-APT series of operators is designed and built for the busiest sites, delivering the rugged durable power you need for these demanding applications. Install Eagle-2000-APT for reliable power. Installation is made simple with the advanced features you most often need standard on every operator. Features like Stop-Reverse, allowing your transmitter to work like a 3-button station or Motor Brake for added control on downhill applications. Master/Slave operation has never been easier. Just two wires provide full communication and Global Inputs between the master and slave operators. Connect any accessories to either the master or slave and the Diamond Control Board does the rest. Dimensions : 26" (W) x 18" (D) x 17" (H). Eagle-200 The Eagle-200 Series is a specially designed line of Heavy Duty Commercial Swing Gate Operators. The models in this series are stong and dependable, ideally suited for Commercial and Industrial aplications. Like all Eagle Operators, this line is manufactured in the USA with special attention to safety, performance, and dependability. The Eagle-200 is a 1/2 HP Model and capable of handling gates up to 20' and 1000lbs with an opening speed of 18-20 seconds. The Eagle-200-1HP Model is intended for heavy duty gates and uses two 1/2 HP motors running in parallel. The Eagle-200-DM Model Gate Operator uses one 1/2 HP motor to open the gate and another to close it, ideal for high traffic Commercial areas. The Eagle-200 Series Operators comes with a 5 year warranty for Commercial applications, which is extended for 7 years if used Residentially. Dimensions : 16" (W) x 22" (D) x 28" (H). Download Eagle-200 Manual

Home : Eagle-2000 : Eagle-1000 : Eagle-200 : Eagle-100 : Power Series : Contact Us Copyright © 2003 Eagle Access Control Systems Inc. All rights reserved.